Garage Flooring and Commercial Coatings
Polyaspratic Coatings Vancouver
Tougher than Epoxy!
Copyright © 2019 Ground Force One™ Vancouver
GroundForce One™ of Vancouver Services: Abbotsford, Burnaby, Chilliwack, Cloverdale, Coquitlam, Delta, Langley, Maple Ridge, New Westminster, North Vancouver, Pitt Meadows, Port Coquitlam, Port Moody, Richmond, Squamish, Sunshine Coast, Surrey, Vancouver, West Vancouver, Whistler
Technical Product Bulletin
Product Features & Benefits
• Excellent penetration & bond strength
• Superior abrasion, impact & wear resistance
• UV-Resistant
• Resistant to hot-tire pickup
• Low temperature cure (-30º F/-34ºC)
• Excellent chemical & stain resistance
• Skydrol resistant
• Micro media agents can be added for enhanced traction
• Tolerant to 300ºF for random, incidental heat contact
• VOC Compliant
COATINGS COATINGS COATINGS
OUR WORK OUR HISTORY REACH OUT
IRON MAN POLYASPARTIC FACTS:
Easy to clean and maintain - Broom or wet mop
Minimal maintenance - No chemicals required to clean
Chemical Resistance - Oil & gas won't penetrate
Long-Lasting - 15 year warranty
Durable - 4x more abrasion resistant than epoxy
Tough - Won't lift under hot tires
Slip Resistance - Safe for kids to play
» Walk on in 2 hrs » Drive on in 24 hrs
Iron Man Coatings® polyaspartic aliphatic polyurea is a two-component, fast-curing primer sealer/finish coating for decorative and protective applications. Our coating is suitable for both interior and exterior applications over properly prepared substrates such as concrete, wood, and polymer-modified overlays.
Iron Man Coatings® polyaspartic features superior penetration and bond strength, abrasion ,impact, and wear resistance, flexibility, and UV stability. Our coatings are highly resistant to a vast array of chemicals, and will not peel up under hot tires.
Our coatings are ideal for garages, warehouses, labs, service areas, showrooms, patios, pool decks, walkways, aircraft hangers, commercial kitchens, washrooms, animal shelters, basements.
Product Features & Benefits
• Self-Priming
• Excellent penetration & bond strength
• Superior abrasion, impact & wear resistance
• UV-Resistant
• Resistant to hot-tire pickup
• Short re-coat time: 1-2 hours or less
• Low temperature cure (-30º F/-34ºC)
• Excellent chemical & stain resistance
• Skydrol resistant
• Micro media agents can be added for enhanced traction
• Tolerant to 300ºF for random, incidental heat contact
• VOC Compliant
Limitations
• Not recommended for use over solvent or water-reducible acrylic sealers or stains.
• Not for use by spray application.
• Not a DIY product.
Product Data
Type of Material: Polyaspartic Aliphatic Polyurea
VOC Content: 0-200 g/L
Recommended Dry Film Thickness: 3 to 7ml per coat
Colours: 12 standard, custom colours available
Shelf Life: 12 months unopened. Store at 40°F to 100°F in a covered area (out of the sun)
Pot Life: 25 to 30 minutes
Minimum Recoat: 1 hour or less
Maximum recoat: 48 hours (contact manufacturer)
Walk-on time: 2-4 hours
Mixing Ratio: 1:1
Tensile Strength - ASTM D 638: 4,720-5,000
Falling Sand Abrasion - ASTM D 968: 32-37
Mandrel Bend - ASTM D 522: Passes, no cracking, 1/8” mandrel bend
